Authorized Dealer of Saturn Inflatable Boats, Rafts and Kayaks Including the

"Saturn Triton Series" with upgraded PVC, heat-welded seams, and C7 valves. 

Call now (800) 217-3270 or (208) 350-6572 and be boating next week!


Up to 60% OFF
Sale

Shop Shop

NRS Frame Raft Motor Mount

NRS Frame Raft Motor Mount

20 of 38
$179.95
Shipping: $0.00
Price in points: 8998 points
Out of stock

Attach an outboard motor to the NRS Raft Motor Mount and your raft is ready for fishing or moving you through those long, flat stretches. 

  • We use our heavy-duty 1-5/8" OD 6061-T6 aluminum pipe to make the framework for the Motor Mount.
  • The 18" wide transom plate is a piece of 2" x 8" wood/plastic composite decking material that will not rot or deteriorate when exposed to water and sun.
  • We back the transom plate with two pieces of aluminum channel to increase the grip on the L-shaped pipe sections. Four oversize U-bolts hold the transom plate firmly in place.
  • If you already have an NRS Stern Seat Mount, you can install your Motor Mount on the Seat Bar.
  • If you do not have a Stern Seat Mount you will need a pair of NRS Stern Side Rails (item #90022.02, sold separately) to link the Motor Mount to the rear Crossbar of your frame. We stock three sizes: 32", 36" and 39". Measure the distance from the center of the rear crossbar to the center of the raft's rear tube. If you need a length other than those stock lengths, we will custom bend the size you need.
  • In our experience, a 10-hp motor is generally as large a motor as most boaters use. Even a 3-hp motor will move a raft along at a pretty good clip. Operating a raft at high speeds can be unsafe, and with a self-bailing raft will definitely result in water jetting up through the drain holes!
  • Always attach a safety rope or strap from your motor to the frame.